Nokia TA-1275 (Nokia 2.4) unlock done but still locked

July 1, 2021, 9:06 am

≫ Next: No IMEI REPAIR OPTION

≪ Previous: A315G There is no information about this firmware on the server.

$

0

0

Selected model: Nokia TA-1275 (Nokia 2.4)
Operation: Unlock network
Software version: 2.0

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM7 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xB6542AA6, 0x040DB3BD, 0x9FCE9C11, 0xBDF91DB0
Get Chip ID... [MT6765]
Get SOC ID... [AD262B539B57579DB86AA172E9F2C2F7FCD8EA46FFA6EEC6DF 81EC766BD6E64A]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [23]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x880103534C44333247599798782F97DF
Load EMI config from database [DB VER: 146 DB DATE: 06-30-2021] OK [1]
Trying EMI [77B9ED1D, C3498624, 935A942F, 143116CD]
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_ID : 0x880103534C44333247599798782F97DF
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x073A000000 (28.91Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Read security partition from phone... OK
Read security files... OK
Read lock info... OK
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

---

No IMEI REPAIR OPTION

July 1, 2021, 9:07 am

≫ Next: AT&T Semi Premium 100% Unlock Express Service!

≪ Previous: Nokia TA-1275 (Nokia 2.4) unlock done but still locked

$

0

0

ALL SAMSUNG MODELS HAVE NO IMEI REPAIR OPTION :confused::confused::confused:

AT&T Semi Premium 100% Unlock Express Service!

July 1, 2021, 9:07 am

≫ Next: A307fn imei option hide.

≪ Previous: No IMEI REPAIR OPTION

$

0

0

HUGE IMEIS UNLOCKED
AT&T Semi Premium Unlocked [ 100% Ratio ]
IPHONE 12-12 PRO MAX
IPHONE 8P-XS MAX
Time: 1-3 Days

REMINDER:
SOME AT&T PROCESSED BY LOW SUCCESS RATE.
THE IMEI TURNS TO STOLEN OR FLAGGED [ NOT UNLOCKABLE FOREVER FOR SEMI ]

GsmForum Section: https://forum.gsmhosting.com/vbb/f1078/
Website:https://phonestyleserver.com/

A307fn imei option hide.

July 1, 2021, 9:16 am

≫ Next: iwatch os 7.5 after error nfc

≪ Previous: AT&T Semi Premium 100% Unlock Express Service!

$

0

0

Hello team a307fn imei repair option hide. (y)

iwatch os 7.5 after error nfc

July 1, 2021, 9:22 am

≫ Next: Ace urban 1 ( boot + read fw ) done

≪ Previous: A307fn imei option hide.

$

0

0

nfo] Using LOCAL IPSW F:\watch 7.4.1\MFC_Watch4,2_7.5_18T567_n131bap_GPS_Restore_ 44mm.ipsw
[info] using cached version data
[info] Found device in DFU mode
[info] Gettting dfu mode device ...
[info] Identified device as Apple Watch S4, n131bap, Watch4,2
[info] Extracting BuildManifest from ipsw
[data] Product Version: 7.5
[data] Product Build: 18T567 Major: 18
[data] Device supports Image4: true
[info] Variant: Customer Erase Install (IPSW)
[info] This restore will erase your device data.
[info] Checking IPSW for required components...
[info] All required components found in IPSW
[info] Found ECID 0018e35e1a06002e
[info] Getting ApNonce in dfu mode... [data] 6B213CF0D94C7405D9A360FBDB457A2675664FF31B3877D050 DDBB92ABECF73E
[info] tts>Trying to fetch new SHSH blob
[info] Getting SepNonce in dfu mode... [data] E43C109A09DBDC46CACF88F98D48CF9A71704997
[note] Unable to find BbChipID node
[note] Unable to find BbProvisioningManifestKeyHash node
[note] Unable to find BbActivationManifestKeyHash node
[note] Unable to find BbCalibrationManifestKeyHash node
[note] Unable to find BbFactoryActivationManifestKeyHash node
[note] Unable to find BbFDRSecurityKeyHash node
[note] Unable to find BbSkeyId node
[info] Request URL set to https://gs.apple.com/TSS/controller?action=2
[info] Sending TSS request attempt 1...
[info] response successfully received
[info] tts>Received SHSH blobs
Filesystem file not found!
We will extract the filesystem to file iDeviceTools/MFC_Watch4,2_7.5_18T567_n131bap_GPS_Restore_44mm/018-19609-077.dmg
[info] Extracting filesystem
[info] Found ECID 0018e35e1a06002e
[info] Getting ApNonce in dfu mode... [data] 6B213CF0D94C7405D9A360FBDB457A2675664FF31B3877D050 DDBB92ABECF73E
[info] tts>Trying to fetch new SHSH blob
[info] Getting SepNonce in dfu mode... [data] E43C109A09DBDC46CACF88F98D48CF9A71704997
[note] Unable to find BbChipID node
[note] Unable to find BbProvisioningManifestKeyHash node
[note] Unable to find BbActivationManifestKeyHash node
[note] Unable to find BbCalibrationManifestKeyHash node
[note] Unable to find BbFactoryActivationManifestKeyHash node
[note] Unable to find BbFDRSecurityKeyHash node
[note] Unable to find BbSkeyId node
[info] Request URL set to https://gs.apple.com/TSS/controller?action=2
[info] Sending TSS request attempt 1...
[info] response successfully received
[info] tts>Received SHSH blobs
[info] Extracting iBSS.n131b.RELEASE.im4p...
[info] Personalizing IMG4 component iBSS...
[info] Sending iBSS (1129125 bytes)...
[warn] If device does not disconnect automatically you can try to disconnect and reconnect the cable!
[info] Device ecid 0018e35e1a06002e disconnect detected!
[info] Waiting for device arrival (timeout 20.000000 seconds)
[info] Found device in Recovery mode
[info] Noce: 6b 21 3c f0 d9 4c 74 05 d9 a3 60 fb db 45 7a 26 75 66 4f f3 1b 38 77 d0 50 dd bb 92 ab ec f7 3e
[info] Extracting iBEC.n131b.RELEASE.im4p...
[info] Personalizing IMG4 component iBEC...
[info] Sending iBEC (1129125 bytes)...
[warn] Device ecid 0018e35e1a06002e disconnect not detected! It might be possible to continue!
[info] device serial number is G99Y2D4ZKDHD
[info] Recovery Mode Environment:
[info] iBoot build-version=iBoot-6723.120.36
[info] iBoot build-style=RELEASE

[info] Sending AppleLogo...
[warn] No path for component AppleLogo in TSS, will fetch from build_identity
[info] Extracting applelogo@448~watch.im4p...
[info] Personalizing IMG4 component AppleLogo...
[info] Sending AppleLogo (10948 bytes)...
[warn] No path for component ACIBT in TSS, will fetch from build_identity
[info] Extracting BT_FW_m9.im4p...
[info] Personalizing IMG4 component ACIBT...
[info] Sending ACIBT (1786649 bytes)...
[warn] No path for component ACIWIFI in TSS, will fetch from build_identity
[info] Extracting wifi_armv7r_m9_rtkit_image.im4p...
[info] Personalizing IMG4 component ACIWIFI...
[info] Sending ACIWIFI (1861453 bytes)...
[warn] No path for component ANE in TSS, will fetch from build_identity
[info] Extracting h11_ane_fw_mercury.im4p...
[info] Personalizing IMG4 component ANE...
[info] Sending ANE (1730909 bytes)...
[warn] No path for component AOP in TSS, will fetch from build_identity
[info] Extracting aopfw-watch4aop.im4p...
[info] Personalizing IMG4 component AOP...
[info] Sending AOP (1735829 bytes)...
[warn] No path for component GFX in TSS, will fetch from build_identity
[info] Extracting armfw_g11m.im4p...
[info] Personalizing IMG4 component GFX...
[info] Sending GFX (848101 bytes)...
[warn] No path for component RestoreTrustCache in TSS, will fetch from build_identity
[info] Extracting 018-19158-077.dmg.trustcache...
[info] Personalizing IMG4 component RestoreTrustCache...
[info] Sending RestoreTrustCache (16358 bytes)...
[warn] No path for component SCE in TSS, will fetch from build_identity
[info] Extracting scefw.im4p...
[info] Personalizing IMG4 component SCE...
[info] Sending SCE (20341 bytes)...
[warn] No path for component SIO in TSS, will fetch from build_identity
[info] Extracting SmartIOFirmware_ASCv2.im4p...
[info] Personalizing IMG4 component SIO...
[info] Sending SIO (1160145 bytes)...
[warn] No path for component WCHFirmwareUpdater in TSS, will fetch from build_identity
[info] Extracting WirelessPower.watch4.im4p...
[info] Personalizing IMG4 component WCHFirmwareUpdater...
[info] Sending WCHFirmwareUpdater (31700 bytes)...
[warn] No path for component RestoreRamDisk in TSS, will fetch from build_identity
[info] Extracting 018-19158-077.dmg...
[info] Personalizing IMG4 component RestoreRamDisk...
[info] Sending RestoreRamDisk (82714264 bytes)...
[warn] No path for component RestoreDeviceTree in TSS, will fetch from build_identity
[info] Extracting DeviceTree.n131bap.im4p...
[info] Personalizing IMG4 component RestoreDeviceTree...
[info] Sending RestoreDeviceTree (39639 bytes)...
[warn] No path for component RestoreSEP in TSS, will fetch from build_identity
[info] Extracting sep-firmware.n131b.RELEASE.im4p...
[info] Personalizing IMG4 component RestoreSEP...
[info] Sending RestoreSEP (5283198 bytes)...
[warn] No path for component RestoreKernelCache in TSS, will fetch from build_identity
[info] Extracting kernelcache.release.watch4...
[info] Personalizing IMG4 component RestoreKernelCache...
[info] Sending RestoreKernelCache (11752306 bytes)...
[info] Device ecid 0018e35e1a06002e disconnect detected!
[info] About to restore device...
[info] Waiting for device...
[info] Device is now connected in restore mode...
[info] Connecting now...
[info] Connected to com.apple.mobile.restored, version 15
[info] Device 00008006-0018E35E1A06002E has successfully entered restore mode
[info] Hardware Information:
[info] BoardID: 10
[info] ChipID: 32774
[info] UniqueChipID: 7005392744087598
[info] ProductionMode: true
[sett] Previous restore exit status: 256
[info] Starting FDR listener thread
[info] Connecting to FDR client at port 1082
[warn] About to do ctrl handshake
[done] Ctrl handshake done (ConnPort = 49158)
[warn] Requesting NOT TO Update Baseband
[info] Sending RootTicket...
[done] sending RootTicket
[info] Waiting for NAND (28)
[info] Updating NAND Firmware (58)
[info] Sending NORData...
[info] Found firmware path Firmware/all_flash
[erro] zip_name_locate: Firmware/all_flash/manifest
[info] Getting firmware manifest from build identity
[info] Extracting LLB.n131b.RELEASE.im4p...
[info] Personalizing IMG4 component LLB...
[info] Extracting applelogo@448~watch.im4p...
[info] Personalizing IMG4 component AppleLogo...
[info] Extracting dali-ui.n131b.release.im4p...
[info] Personalizing IMG4 component Dali...
[info] Extracting DeviceTree.n131bap.im4p...
[info] Personalizing IMG4 component DeviceTree...
[info] Extracting recoverymode@448~watch.im4p...
[info] Personalizing IMG4 component RecoveryMode...
[info] Extracting WirelessPower.watch4.im4p...
[info] Personalizing IMG4 component WCHFirmwareUpdater...
[info] Extracting iBoot.n131b.RELEASE.im4p...
[info] Personalizing IMG4 component iBoot...
[info] Extracting sep-firmware.n131b.RELEASE.im4p...
[info] Personalizing IMG4 component RestoreSEP...
[info] Extracting sep-firmware.n131b.RELEASE.im4p...
[info] Personalizing IMG4 component SEP...
[info] Sending NORData now...
[info] Done sending NORData
[info] Unmounting filesystems (29)
[info] About to send FDR Trust data...
[info] Sending FDR Trust data now...
[done] sending FDR Trust Data
[info] Checking for uncollected logs (44)
[info] Connecting to FDR client at port 49158
[info] FDR 0EFCBDC8 Proxy connect request to xp.apple.com:443
[erro] FDR 0EFCBDC8 Unable to receive proxy payload (-3)
[info] Unmounting filesystems (29)
[info] Creating partition map (11)
[info] Creating filesystem (12)
[info] About to send filesystem...
[info] Connected to ASR
[info] Validating the filesystem
[info] Filesystem validated
[info] Sending filesystem now...
[done] sending filesystem
[info] Operation: Verifying restore (14)
[info] Unmounting filesystems (29)
[info] Checking filesystems (15)
[info] Mounting filesystems (16)
[info] Operation: Unknown operation (80)
[info] Sending IsiBootEANFirmware image list
[info] Sending IsiBootNonEssentialFirmware image list
[info] Flashing firmware (18)
[info] Operation: Unknown operation (80)
[info] Sending IsEarlyAccessFirmware image list
[info] Sending IsiBootEANFirmware image list
[info] Sending IsiBootNonEssentialFirmware image list
[info] Operation: Requesting FUD data (36)
[info] Found IsFUDFirmware component ACIBT
[info] Found IsFUDFirmware component ACIWIFI
[info] Found IsFUDFirmware component ANE
[info] Found IsFUDFirmware component AOP
[info] Found IsFUDFirmware component GFX
[info] Found IsFUDFirmware component LeapHaptics
[info] Found IsFUDFirmware component Multitouch
[info] Found IsFUDFirmware component RTP
[info] Found IsFUDFirmware component RestoreTrustCache
[info] Found IsFUDFirmware component SCE
[info] Found IsFUDFirmware component SIO
[info] Found IsFUDFirmware component StaticTrustCache
[info] Sending IsFUDFirmware image list
[info] Extracting BT_FW_m9.im4p...
[info] Personalizing IMG4 component ACIBT...
[info] Sending IsFUDFirmware for ACIBT...
[info] Extracting wifi_armv7r_m9_rtkit_image.im4p...
[info] Personalizing IMG4 component ACIWIFI...
[info] Sending IsFUDFirmware for ACIWIFI...
[info] Extracting h11_ane_fw_mercury.im4p...
[info] Personalizing IMG4 component ANE...
[info] Sending IsFUDFirmware for ANE...
[info] Extracting aopfw-watch4aop.im4p...
[info] Personalizing IMG4 component AOP...
[info] Sending IsFUDFirmware for AOP...
[info] Extracting armfw_g11m.im4p...
[info] Personalizing IMG4 component GFX...
[info] Sending IsFUDFirmware for GFX...
[info] Extracting N131B_LeapHapticsFirmware.im4p...
[info] Personalizing IMG4 component LeapHaptics...
[info] Sending IsFUDFirmware for LeapHaptics...
[info] Extracting N131b_Multitouch.im4p...
[info] Personalizing IMG4 component Multitouch...
[info] Sending IsFUDFirmware for Multitouch...
[info] Extracting rtpfw.im4p...
[info] Personalizing IMG4 component RTP...
[info] Sending IsFUDFirmware for RTP...
[info] Extracting 018-19158-077.dmg.trustcache...
[info] Personalizing IMG4 component RestoreTrustCache...
[info] Sending IsFUDFirmware for RestoreTrustCache...
[info] Extracting scefw.im4p...
[info] Personalizing IMG4 component SCE...
[info] Sending IsFUDFirmware for SCE...
[info] Extracting SmartIOFirmware_ASCv2.im4p...
[info] Personalizing IMG4 component SIO...
[info] Sending IsFUDFirmware for SIO...
[info] Extracting 018-19609-077.dmg.trustcache...
[info] Personalizing IMG4 component StaticTrustCache...
[info] Sending IsFUDFirmware for StaticTrustCache...
[info] Updating gas gauge software (47)
[info] Updating Stockholm (55)
[info] Status message: Ramrod firmware update failed.
Hint: The display of this model is not compatible, or you can replace the NFC module
[sett] Log is available in ErrorLog.plist
[erro] Unable to successfully restore device
[erro] Unable to restore device
[done] Operation finished!



new apple watch s4/44mm this is what is problem?

Ace urban 1 ( boot + read fw ) done

July 1, 2021, 9:38 am

≫ Next: Oppo a1k cph1923 ( boot done + read info + reset frp user data + read fw DONE

≪ Previous: iwatch os 7.5 after error nfc

$

0

0

original poster
دراجي سوفت DZGSM

Oppo a1k cph1923 ( boot done + read info + reset frp user data + read fw DONE

July 1, 2021, 9:48 am

≫ Next: SAMSUNG CPiD & CARRIER UNLOCK AND FRP SERVICES STILL WORKING COOL

≪ Previous: Ace urban 1 ( boot + read fw ) done

$

0

0

original poster
دراجي سوفت DZGSM

SAMSUNG CPiD & CARRIER UNLOCK AND FRP SERVICES STILL WORKING COOL

July 1, 2021, 10:16 am

≫ Next: can;t download firmware

≪ Previous: Oppo a1k cph1923 ( boot done + read info + reset frp user data + read fw DONE

$

0

0

SAMSUNG SERVICES:

#1 CPID IMEI Repair
#2 Demo Remove
#3 IMEI NG Repair
#4 Carrier Unlock
#5 Network Unlock
#6 FRP Remove

we are provide Samsung all most services/we are real direct sources

Note: payment method Crypto Currency


Contact With Us,
Whatsapp : +973 34119292
Email: GM7Unlock@Gmail.Com
WeChat: GM7Unlock
Skype: Gsm_masud7@Yahoo.Com

Place Your order
Www.GM7Unlock.com
TRUSTED UNLOCK SOURCES

---

can;t download firmware

July 1, 2021, 10:18 am

≫ Next: Xiaomi redmi note8(ginkgo) remove miaccount done

≪ Previous: SAMSUNG CPiD & CARRIER UNLOCK AND FRP SERVICES STILL WORKING COOL

$

0

0

i am getting this error when i am trying to download fw


Sorry, you can't view or download this file at this time.
Too many users have viewed or downloaded this file recently. Please try accessing this page again later. If the file you’re trying to access is particularly large or you have shared the download address with others, it may take up to 24~48 hours to be able to view or download the file. If you still can’t access the page after 48 hours, it means that your account has been automatically blocked by the server.

Xiaomi redmi note8(ginkgo) remove miaccount done

July 1, 2021, 10:22 am

≫ Next: No imei repair is displayed (BUG NEW UPDATE)

≪ Previous: can;t download firmware

$

0

0

Attached Images

	Screenshot_07-01-2021-214913.jpeg (153.6 KB)
	Screenshot_07-01-2021-214920.jpeg (151.9 KB)

No imei repair is displayed (BUG NEW UPDATE)

July 1, 2021, 10:28 am

≫ Next: iphone 5s not ok icloud failed

≪ Previous: Xiaomi redmi note8(ginkgo) remove miaccount done

$

0

0

No imei repair is displayed. Please solve the problem as soon as possible. Thank you.

Attachment 381779

Attached Images

Captura.PNG (40.3 KB)

iphone 5s not ok icloud failed

July 1, 2021, 10:31 am

≫ Next: samsung j6 plus unlock error

≪ Previous: No imei repair is displayed (BUG NEW UPDATE)

$

0

0

with eft pro 4.0.1

Preparing paths.....OK
Setting up.....OK
Checking iDevices.....OK
Reading iDevice info.....OK
Activation Status: Activated
CPU Arch: arm64
Device Class: iPhone
Device Name: iPhone
Firmware Version: iBoot-4513.270.14
Device IMEI: 359.......
Product Name: iPhone OS
Product Type: iPhone 5S (Global)
IOS Version: 12.5.4
SIM Status: kCTSIMSupportSIMStatusReady
Device Serial Number: DX3QK1GZFFGF
MEID Status: Not Supported
Preparing.....OK
Bypassing.....Failed
Operation {Bypass iCloud at Hello Screen} ID: 025EA5FEBB33205E
Elapsed time 02:19 -- Version 4.0.1

samsung j6 plus unlock error

July 1, 2021, 10:36 am

≫ Next: s32+ unlock error

≪ Previous: iphone 5s not ok icloud failed

$

0

0

Chimera Mobile Phone Utility version: 28.91.1211 @ 2021-07-01
Printing phone history

Read Codes Online
01-07-2021
17:24

Read Codes Online
01-07-2021
16:46

Read Codes Online
01-07-2021
16:42

Read Codes Online
01-07-2021
16:40

Read Codes Online
01-07-2021
16:36

Read codes started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J610FN
Carrier ID: TCL
Sales Code: TCL
Country Code: Portugal
Timezone: Europe/Lisbon
Android Version: 10 [QP1A.190711.020] [SDK 29]
Build Date: Tue May 11 14:16:43 KST 2021
PDA Version: J610FNXXS7CUD3 [april 2021, rev3]
Phone Version: J610FNXXS7CUD2 [april 2021, rev2]
CSC Version: J610FNOVF7CUD3 [april 2021, rev3]
Board Platform: MSM8937
Modem Platform: MSM8917
Serial Number: R58M22L5K2B
Imei: 355417100604633
Network Type: GSM
SIM Status: ABSENT
Multisim Config: SS
Knox Version: v30
Warranty Bit: 0
Security Patch: 2021-05-01
Em Did: 0056061CDF81
Preparing...
The phone will restart in upload mode.
Switching to upload mode. Be patient! Do NOT disconnect the phone!
Waiting for upload interface...
Waiting for upload interface. Be patient! Do NOT disconnect the phone!
Upload interface: SAMSUNG Mobile USB Modem (COM11)
Reading data...
Reading data is in progress. Be patient! Do NOT disconnect the phone!:confused:;)



no reading data ,,,,,

s32+ unlock error

July 1, 2021, 10:37 am

≫ Next: Only method still online to unlock A21 A215U A01 A015T A11 A115U A115V Verizon T-Mobi

≪ Previous: samsung j6 plus unlock error

$

0

0

Exe version: NCKBox AndroidMTK 2.9.4
Selected model: 0-By CPU MT6739
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(599) : MediaTek PreLoader USB VCOM Port (COM599)
[599] \\?\usb#vid_0e8d&pid_2000#6&321130f2&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6739 2 cb00
Using Algo 1.
Helio MT6739 phone detected, swithing to helio api
Helio enabled DRAM in First Da: FALSE
Sending loader.....
Helio connect da error, aborting.
[SECURE BOOT]Not supported by exe or wrongly selected, aborting
If model is listed, please select correct model
If model is not listed, use custom DA from phone firmware
BBCHIP MT6739
Boot Fail.!!!.
[helio]Wait untill phone will start charging.
[0]All done.

Only method still online to unlock A21 A215U A01 A015T A11 A115U A115V Verizon T-Mobi

July 1, 2021, 10:46 am

≫ Next: Vodacom Factory Unlock Code BY IMEI Direct secure Instant Auto API

≪ Previous: s32+ unlock error

$

0

0

Service name : Samsung A21 A215U A01 A015T A015T1 A015AZ A015A A015V A11 A115U A115A A115V Sprint Verizon T-Mobile Cricket Direct Unlock
Time: 10-15 Minutes
IMEI supported: Samsung A21, A01, A11 locked to Sprint, Verizon, T-mobile or Cricket.

For more details

OFFICIAL SUPPORT SECTION: OnlineUnlocks Resellers
Website: UnlocksResellers.com
Email: unlockresellers.com@gmail.com
Skype: Onlineunlocks

---

Vodacom Factory Unlock Code BY IMEI Direct secure Instant Auto API

July 1, 2021, 10:52 am

≫ Next: redmi note 6 pro not done frp why ?

≪ Previous: Only method still online to unlock A21 A215U A01 A015T A11 A115U A115V Verizon T-Mobi

$

0

0

Kindly before you order make sure
IMEI from the inside to get IMEI dial *#06#
Please do not submit model which IS not in our list
Supported Models list in the Below :)

Vodafone VFD 200 network Unlock CODE BY IMEI
Vodafone Smart N8 V610 network Unlock CODE BY IMEI
Vodafone VFD 320 network Unlock CODE BY IMEI
Vodafone VFD 100 network Unlock CODE BY IMEI
MOBIWIRE VODACOM Network Unlock Code
Vodacom Vibe 4G Sim network Unlock CODE BY IMEI
Vodacom Vibe 3G Sim network Unlock CODE BY IMEI
Vodacom Kicka 4 Plus 4G Network Unlock Code BY IMEI
Vodacom Kicka ZOOM (H5024) 4G Network Unlock Code by imei
Vodacom Kicka ZOOM 4G Network Unlock Code by imei
Vodacom Kicka ZOOM (H5024) Network Unlock Code by imei
Vodacom Kicka 5 Plus 4G Network Unlock Code BY IMEI
Vodacom Kicka 4 Plus Network Unlock Code BY IMEI
Vodacom Kicka 5 Plus (H5032) 4G Network Unlock Code by imei
Vodacom Kicka 5 Plus Network Unlock Code BY IMEI
Vodacom Kicka 5 (H5062) Network Unlock Code BY IMEI
Vodacom Kicka 4 Plus (H4023) Network Unlock Code BY IMEI
Vodacom Kicka 5 (H5062) 4G Network Unlock Code BY IMEI
Vodacom Kicka 4 Plus (H4023) 4G Network Unlock Code BY IMEI

Order now
www.gsmafrica.com

WhatsApp +27659713366
Telegram https://t.me/gsmafrica1


BR...
Gsm Africa Team

redmi note 6 pro not done frp why ?

July 1, 2021, 11:08 am

≫ Next: Redmi note 10 Mojito Baseband unknown

≪ Previous: Vodacom Factory Unlock Code BY IMEI Direct secure Instant Auto API

$

0

0

Code:

---

Device    : Xiaomi Redmi Note 6 Pro
Operation    : Reset FRP
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info    : HS Corporation, ghsser.sys, 10.2104.1.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1C00C00 [8996] 00000000
OPK_DATA    : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_016]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Skipping Auth...Failed
Error Log    : PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiID8+CjxkYXRhPgo8bG9nIHZhbHVlPSJTaWduYXR1cmUgVmVyaWZpY2F0aW9uIEZhaWxlZCIvPgo8L2RhdGE+PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiID8+CjxkYXRhPgo8cmVzcG9uc2UgdmFsdWU9Ik5BSyIgLz4KPC9kYXRhPn==
Reading Auth Blob...Not Found!
DebugData    : BAAAABAAAAANAAAAAQAAAA==
Storage Initializaton Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 6.9

---

Redmi note 10 Mojito Baseband unknown

July 1, 2021, 11:18 am

≫ Next: Caterpillar CAT S31 frp Done by Octoplus FRP Tool

≪ Previous: redmi note 6 pro not done frp why ?

$

0

0

i make remove MI ACC and FRP for EDL mode, have sucess.. But the device show Baseband unknown. i dont know whether it was before or after the procedure. I made a Full Flash in the highest version V12.0.11.0.RKGMIXM but not solve the problem.

Now, the device power on, working.. BUT no service, no wifi and baseband unknow.

Its possible solve?

Caterpillar CAT S31 frp Done by Octoplus FRP Tool

July 1, 2021, 11:26 am

≫ Next: huawei p30 no power on

≪ Previous: Redmi note 10 Mojito Baseband unknown

$

0

0

Caterpillar CAT S31 frp Done by Octoplus FRP Tool

Quote:

Work ID: 000000000134B7EF Platform: __GENERAL RESET FRP METHODS Selected model: QUALCOMM EDL AUTODETECT Please, power phone OFF put the phone in EDL mode and connect USB cable. Found phone on COM43 Mode: Qualcomm 9008 Connecting... Reading info... QC Block ID: 17107AA1 QC HW ID: 009600E100000000 QC CPU: Snapdragon 210 MSM8909 QC HASH: 2FA1C166DBDD494D58C60F435DA034ADF6828A891ED983116A 165BD5621DA50E QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: Cat Model: S31 Device: CatS31 Platform: msm8909 Android version: 8.1.0 Display ID: LTE_D0201121.0_S31_1.020.00 Firmware version: LTE_D0201121.0_S31_1.020.00 Resetting FRP lock.. Searching for signatures... FRP lock is successfully reseted! Performed by 2.0.3.0 Software version.

huawei p30 no power on

July 1, 2021, 11:52 am

≫ Next: vog-l29 stuck on erecovery

≪ Previous: Caterpillar CAT S31 frp Done by Octoplus FRP Tool

$

0

0

good evening dear sirs,
I changed the display and touch on the huawei p30 ELE-L29 with original spare parts complete of a new battery and reassembled the main board now the
smartphone no power on (no vibrator when in preessed the power key).
If use a power supply whit a digital amperometer the phone charge the battery
(because absorbe 0,6-0,7 amp when isert the usb cable ) but no power.
If connect the cable on the PC USB and the smartphone the windows
not see anything...
I tryed su riassemblythe main board on old broken display and is the same
situation...no power on.
Ther'is someone can help me to understand the problem or check something on
the main board? not have S.M or schematics...
Tank's in advance,
archimede