Certified exchange y9 2019 for another of the same, which is not from Colombia, preferably from Europe. My certificate is Colombian but nobody else has it, only serious people
↧
Certified exchange y9 2019 by furious gold
↧
Hi twam octopus, os this N960U at&t supported? Is not asking for unlock code
I have this samsung N960U at&t u.s.a that has network locked like tmobile unlock app now, is not asking for unlock code anymore like the old samung unlocking method via read codes.
I cannot even find any unlock app on the software. Let me know if supported. Thanks
Searching for SAMSUNG Mobile USB Modem...OK
SAMSUNG USB Modem detected on [COM6]
Looking for DEVICE...OK
Reading USB MODEM information...OK
MODEL : SM-N960U
VER : N960USQS5FTK2/N960UOYN5FTK2/N960USQS5FTK2/N960USQS5FTK2
I cannot even find any unlock app on the software. Let me know if supported. Thanks
Searching for SAMSUNG Mobile USB Modem...OK
SAMSUNG USB Modem detected on [COM6]
Looking for DEVICE...OK
Reading USB MODEM information...OK
MODEL : SM-N960U
VER : N960USQS5FTK2/N960UOYN5FTK2/N960USQS5FTK2/N960USQS5FTK2
↧
↧
Huwei P20 Global (EML-L09) FRP/Huawei ID Remove DONE
--------- 2021-01-20 19:07:46 ---------
SigmaKey 2.39.08 HiSi: Remove FRP / Huawei ID
HUAWEI USB COM 1.0 (COM20), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 05/11/2015, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 970
Phone model: EML-L09
Version: EML-L09 9.1.0.388(C25E9R1P12)
Removing FRP lock...Done
Removing Huawei ID....Done
;)
SigmaKey 2.39.08 HiSi: Remove FRP / Huawei ID
HUAWEI USB COM 1.0 (COM20), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 05/11/2015, USB\VID_12D1&PID_3609&REV_0100
HiSilicon: Kirin 970
Phone model: EML-L09
Version: EML-L09 9.1.0.388(C25E9R1P12)
Removing FRP lock...Done
Removing Huawei ID....Done
;)
↧
i lost 100 crd
Welcome to Octoplus/Octopus Box LG Software version 3.0.8.04
Card S/N : 01000035DB
--------------------------------------------------------------------------------
Selected USB connection type
Work ID: 0000000000746681
Checking data...OK
Platform: LG MTK
Selected port:
Selected baudrate: 0
Selected model: K500MM
Connecting to phone...
Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.
Phone found at port COM458
Mode: Emergency
Initializing flash...OK
Model ID: LM-K500MM
Platform: mt6765
Android version: 10
SW version: LMK500MMAT-02-V10l-310-160-NOV-21-2020-ARB00+0
LAF Version: 1.1
Product ID: WI06S200921017550
IMEI: 355041-61-342427-9
Target operator: LAO
Hardware: rev_10
Battery level: 78%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI: 355041-61-342427-9
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: ot3dafp
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 600 credits.
To perform "Reset FRP" operation you need to have 100 credits.
Reading partitions...OK
Prepairing for change protect status...
Connecting to phone...Failed!
Could not detect mode.
Performed by 3.0.8.04 Software version.
--------------------------------------------------------------------------------
Connecting to server ...OK
Username: ot3dafp
Authorizing...OK
Checking balance...OK
Your balance: 500 credits.
please refund 100 after repeat the process its good
Card S/N : 01000035DB
--------------------------------------------------------------------------------
Selected USB connection type
Work ID: 0000000000746681
Checking data...OK
Platform: LG MTK
Selected port:
Selected baudrate: 0
Selected model: K500MM
Connecting to phone...
Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.
Phone found at port COM458
Mode: Emergency
Initializing flash...OK
Model ID: LM-K500MM
Platform: mt6765
Android version: 10
SW version: LMK500MMAT-02-V10l-310-160-NOV-21-2020-ARB00+0
LAF Version: 1.1
Product ID: WI06S200921017550
IMEI: 355041-61-342427-9
Target operator: LAO
Hardware: rev_10
Battery level: 78%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI: 355041-61-342427-9
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: ot3dafp
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 600 credits.
To perform "Reset FRP" operation you need to have 100 credits.
Reading partitions...OK
Prepairing for change protect status...
Connecting to phone...Failed!
Could not detect mode.
Performed by 3.0.8.04 Software version.
--------------------------------------------------------------------------------
Connecting to server ...OK
Username: ot3dafp
Authorizing...OK
Checking balance...OK
Your balance: 500 credits.
please refund 100 after repeat the process its good
↧
SM-G920T1 DRK fix failed
Good day. I am unable to fix DRK with the usb method and for the uarth method, the phone is not being detected. Any help is greatly appreciated. Please see log:
Work ID: 000000000074674A
Platform: Samsung Android
Selected port: COM5
Selected model: SM-G920T1
Operation: DRK Fix
Detected phone model: SM-G920T1
Firmware compiled date: Fri Mar 9 18:07:27 KST 2018
PDA version: G920T1UVS6FRC1
CSC version: G920T1TMB6FRC1
SW version: G920T1UVS6FRC1
Build number: UNKNOWN
Phone SN: RF1D45EJGGR
Android version: 7.0 (NRD90M)
Sales code: TMB
Country: USA
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2018-03-01
Warranty Void: 1
SIM 1 status: absent
Codename: zerofltemtr
Checking Root:
Phone is Rooted.
Initializing exploit...
Executing exploit...
DM-Verity verification..not good!
Fixing DRK..
error 0x00000002
DRK fixing failed!
Performed by 3.0.1.7 Software version.
Work ID: 000000000074674A
Platform: Samsung Android
Selected port: COM5
Selected model: SM-G920T1
Operation: DRK Fix
Detected phone model: SM-G920T1
Firmware compiled date: Fri Mar 9 18:07:27 KST 2018
PDA version: G920T1UVS6FRC1
CSC version: G920T1TMB6FRC1
SW version: G920T1UVS6FRC1
Build number: UNKNOWN
Phone SN: RF1D45EJGGR
Android version: 7.0 (NRD90M)
Sales code: TMB
Country: USA
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2018-03-01
Warranty Void: 1
SIM 1 status: absent
Codename: zerofltemtr
Checking Root:
Phone is Rooted.
Initializing exploit...
Executing exploit...
DM-Verity verification..not good!
Fixing DRK..
error 0x00000002
DRK fixing failed!
Performed by 3.0.1.7 Software version.
↧
↧
EFT Update V3.8.0 is released - Huawei FRP & factory fastboot for Kirin 710 & 980
EFT Pro Dongle Update V3.8.0 is released:
- [Huawei] Added support to reset FRP for (710 - 980) chipsets:
-- OneClick without steps
-- Without Unlock Fastboot & bootloader
-- Without format
-- Less than 1 minute operation
- [Huawei] Added support to unlock Fastboot temporarily for (710 - 980) chipsets.
- [Huawei] Added support to unbrick devices for (710 - 980) chipsets.
- [Huawei] New Supported models:
YAL-AL00
YAL-L21
YAL-TL00
YAL-AL00
YAL-AL10
YAL-L41
YAL-TL00
YAL-TL10
YAL-L21
TNY-AL00
TNY-TL00
PCT-AL10
PCT-TL10
PCT-L29
PCT-LX9
HMA-AL00
HMA-L29
HMA-TL00
HMA-LX9
LYA-AL00
LYA-AL10
LYA-L09
LYA-L0C
LYA-L29
LYA-LX9
LYA-TL00
LYA-AL00P
LYA-L29
EVR-AL00
EVR-AN00
EVR-L29
EVR-N29
TAH-N29
TAH-TN00
SCM-AL09
SCM-W09
VRD-AL09
VRD-W09
SEA-AL10
SEA-TL10
YAL-L21
YAL-L61
YAL-L71
YAL-LX1
YAL-L21
YAL-L61
ELE-L04
ELE-L09
ELE-AL00
ELE-AL10
ELE-L29
ELE-TL00
VOG-L01
VOG-TL00
VOG-AL00
VOG-AL10
VOG-L04
VOG-L09
VOG-L29
VOG-L04
VOG-L29
ELE-L29
ART-AL00
ART-AL00x
ART-TL00
ART-TL00x
STK-AL00
STK-TL00
AQM-AL00
AQM-TL00
AQM-AL00
JKM-AL00
JKM-AL00
JKM-AL00
JKM-AL00B
POT-AL00
POT-AL00a
POT-TL00
POT-TL00a
POT-AL00a
HRY-AL00
HRY-L21
HRY-L22
HRY-LX2
HRY-TL00
HRY-AL00
HRY-AL00a
HRY-TL00
HRY-AL00
HRY-LX1T
HRY-AL00
HRY-AL00T
HRY-L21
HRY-L21T
LRA-AL00
HRY-LX1T
HRY-AL00T
HRY-AL00T
JSN-AL00
JSN-L21
JSN-L22
JSN-L23
JSN-L42
JSN-LX2
JSN-LX3
JSN-TL00
JSN-AL00
JSN-L22
JSN-LX1
STK-L22
STK-LX2
JDN2-AL00
JDN2-AL00HN
JDN2-W09HN
AGS3-AL09HN
AGS3-W09HN
AGR-AL09HN
AGR-W09HN
ASK-AL00
ASK-AL00x
ASK-TL00
SNE-AL00
POT-AL10
SNE-L01
SNE-L03
SNE-L21
SNE-L22
SNE-L23
SNE-LX1
SNE-LX2
SNE-LX3
AGS3-L09
JDN2-L09
JDN2-W09
INE-AL00
INE-LX2
INE-TL00
MAR-AL00
MAR-L22
MAR-TL00
MAR-AL00
MAR-LX2
MAR-TL00
GLK-AL00
GLK-TL00
GLK-AL00
GLK-TL00
POT-L62J
POT-L72J
POT-LX2
POT-LX2J
POT-L21
POT-L23
POT-LX1
POT-LX1AF
POT-LX1RUA
POT-LX3
POT-L21A
POT-LX1A
INE-L21
STK-L21
AQM-LX1
STK-LX1
INE-LX1
POT-AL00
GLK-LX1U
MAR-L01
MAR-L01A
MAR-L01M
MAR-L21
MAR-L21BX
MAR-L21M
MAR-L22
MAR-L23
MAR-L23A
MAR-LX1
MAR-LX1A
MAR-LX1M
MAR-LX21
MAR-LX21A
MAR-LX2J
MAR-LX3
MAR-LX3A
MAR-LX2
ART-L29
ART-L28
ART-L29
AQM-L01A
AQM-L21
AQM-L21A
AQM-LX1
JKM-LX1
JKM-LX2
JKM-LX3
JKM-L21
JKM-L22
JKM-L23
JKM-LX1
JKM-LX2
JKM-LX3
STK-LX3
STK-L03B
STK-L21
STK-LX3
Kind Regards, Easy Firmware Team
Get Now EFT Dongle From Nearest Distrubutor/Reseller Here
EFT Tool Pro WithoutDongle
![]()
![]()
Get Now EFT Dongle From Nearest Distrubutor/Reseller Here
EFT Tool Pro WithoutDongle
↧
EFT Update V3.8.0 is released - Huawei FRP & factory fastboot for Kirin 710 & 980
EFT Dongle PRO V 3.8.0
Powered by Easy Firmware
What is New ?
EFT Pro Dongle Update V3.8.0 is released:
- [Huawei] Added support to reset FRP for (710 - 980) chipsets:
-- OneClick without steps
-- Without Unlock Fastboot & bootloader
-- Without format
-- Less than 1 minute operation
- [Huawei] Added support to unlock Fastboot temporarily for (710 - 980) chipsets.
- [Huawei] Added support to unbrick devices for (710 - 980) chipsets.
- [Huawei] New Supported models
Check More Here
BR
EASY Team
Powered by Easy Firmware
What is New ?
EFT Pro Dongle Update V3.8.0 is released:
- [Huawei] Added support to reset FRP for (710 - 980) chipsets:
-- OneClick without steps
-- Without Unlock Fastboot & bootloader
-- Without format
-- Less than 1 minute operation
- [Huawei] Added support to unlock Fastboot temporarily for (710 - 980) chipsets.
- [Huawei] Added support to unbrick devices for (710 - 980) chipsets.
- [Huawei] New Supported models
Check More Here
BR
EASY Team
↧
Remove FRP Huawei ANE-LX1 By UMTv2 - UltimateHST
Remove FRP Huawei ANE-LX1 9.1 306 C432 by UMTv2 - UltimateHST
![]()
Code:
Operation : Reset FRP
Searching for COM1.0 Device...Found!
COM36 : HUAWEI USB COM 1.0 (COM36)
Opening Port...OK
Sending Loader [XLOADER]...OK
Sending Loader [FASTBOOT]...OK
Searching for Device in FastBoot Mode...OK
Model : ANE-LX1
Build : ANE-LX1 9.1.0.306(C432E6R1P7)
BL Status : Unlocked
User Status : Locked
Serial : 9WV7N18913003682
IMEI1 : 8610000000000000
IMEI2 : 8610000000000000
MEID : 00000000000000
Resetting FRP...Done
Device will reboot and wipe.
Operation Finished.
UltimateHST v0.1↧
error installling emmc tool suite v 1.6.3.0
need help on my easy jtag i want to update but after installing this error show">
this program does not support the version of your Windows
your computer is running.
im on windows 10 64 bit intel core i5 10th gen
this program does not support the version of your Windows
your computer is running.
im on windows 10 64 bit intel core i5 10th gen
↧
↧
Risanserver Is Always Leading
We Are Working With some Selected Customers
All the update existing In our server
We Do not Post / advertise Anywhere, In order to give best support and service To Existing customers
we have world best cheapest rate for many services our own plugging and script all running accurate
Risanserver
Match With Us Can't Match To Us!
All the update existing In our server
We Do not Post / advertise Anywhere, In order to give best support and service To Existing customers
we have world best cheapest rate for many services our own plugging and script all running accurate
Risanserver
Match With Us Can't Match To Us!
↧
Please added unlock Xiaomi Mi Account by credit.
Please added unlock Xiaomi Mi Account by credit ..;)
↧
difference between diag mode/Nand Mode on S2PS2 soft
Dear infinity Team
i would like to know when should we use on S2PS2 soft diag mode/Nand Mode
whats is the difference between both control option!
i would like to know when should we use on S2PS2 soft diag mode/Nand Mode
whats is the difference between both control option!
↧
Borneoschematics daily update 21 january 2021 🔥🔥🔥
BORNEOSCHEMATICS DAILY UPDATE 21 JANUARY 2021 🔥🔥🔥
☑️ Complete Hardware Solutions iPHONE 6
☑️ 100 LAPTOP (ACER , DELL , LENOVO) Schematics
☑️ Xiaomi Mi-8SE Bitmap
☑️ Micromax Q415 Schematics
GREAT UPDATE FOR U !!!
↧
↧
INVENS H6 with user Data damaged stock on Android logo
Hi
i have on hand Invens H6 stocked on Android logo even when flash with good file and i am faced below issue on phone
1-phone have user data damaged
2-i cannot read flash back up
during this step cannot got phone model info and got below msg
Operation : Read FW [ v2.10 ]
Extra : Ignore CriticalPart Verify : Enabled
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
AndroidVer : 0
VlnrLevel : 0x01
>>> Error : Such directory already exists! Avoid overwriting existing data!
>>> Manual remove of old data required!
Reconnect Power/Cable!
Reconnect Power/Cable!
Open : SPD_PROG.xml
Reading package ...
Read package finished!
Created by Infinity-Box (c) 2020
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt
Patch Level : MRA58K
Display ID : Invens-H6_31G_A6_Android_8.1_V01_2020-07-29
Ver. Incmt : root-103233
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-12-01
Build Time : 29.07.2020
Product Brand : android_1
Product Name : H6
Product Device : H6
Product Board : sp7731gea_hdr
Product Manfct : android_1
Board Platform : sc8830
Product Info : H6
Product Model : H6
SECSolution : LEGACY [SS]
Operation : Flash Firmware [ v2.10 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
PMTMng : Load PMT
PMTMng : 0x20
PMTMng : Update PMT Ok!
FSIMG : prodnv.img
CODE : wmodem.bin
CODE : wdsp.bin
CODE : modem_wcn.img
CODE : boot_logo.bmp
CODE : fastboot_logo.bmp
CODE : logo2.bin
CODE : logo3.bin
CODE : logo4.bin
CODE : logo5.bin
CODE : boot.img
FSIMG : system.img
FSIMG : persist.img
FSIMG : sysinfo.bin
FSIMG : cache.img
CODE : recovery.img
FSIMG : userdata.img
UBOOT : u-boot.bin
UBOOT : u-boot-spl.bin
ERASE : WFLASH
ERASE : WCNFLASH
ERASE : MISC
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:03:58
Operation : Identify [ v2.10 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Identify [ v2.10 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
>>> ERROR : BOOT ACK not received!
>>> Error : Fail to init protocol!
>>> Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Identify [ v2.10 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
>>> ERROR : FDL Start Failed!
>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
Reconnect Power/Cable!
Operation : Identify [ v2.10 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Identify [ v2.10 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:56
i have on hand Invens H6 stocked on Android logo even when flash with good file and i am faced below issue on phone
1-phone have user data damaged
2-i cannot read flash back up
during this step cannot got phone model info and got below msg
Operation : Read FW [ v2.10 ]
Extra : Ignore CriticalPart Verify : Enabled
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
AndroidVer : 0
VlnrLevel : 0x01
>>> Error : Such directory already exists! Avoid overwriting existing data!
>>> Manual remove of old data required!
Reconnect Power/Cable!
Reconnect Power/Cable!
Open : SPD_PROG.xml
Reading package ...
Read package finished!
Created by Infinity-Box (c) 2020
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt
Patch Level : MRA58K
Display ID : Invens-H6_31G_A6_Android_8.1_V01_2020-07-29
Ver. Incmt : root-103233
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-12-01
Build Time : 29.07.2020
Product Brand : android_1
Product Name : H6
Product Device : H6
Product Board : sp7731gea_hdr
Product Manfct : android_1
Board Platform : sc8830
Product Info : H6
Product Model : H6
SECSolution : LEGACY [SS]
Operation : Flash Firmware [ v2.10 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
PMTMng : Load PMT
PMTMng : 0x20
PMTMng : Update PMT Ok!
FSIMG : prodnv.img
CODE : wmodem.bin
CODE : wdsp.bin
CODE : modem_wcn.img
CODE : boot_logo.bmp
CODE : fastboot_logo.bmp
CODE : logo2.bin
CODE : logo3.bin
CODE : logo4.bin
CODE : logo5.bin
CODE : boot.img
FSIMG : system.img
FSIMG : persist.img
FSIMG : sysinfo.bin
FSIMG : cache.img
CODE : recovery.img
FSIMG : userdata.img
UBOOT : u-boot.bin
UBOOT : u-boot-spl.bin
ERASE : WFLASH
ERASE : WCNFLASH
ERASE : MISC
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:03:58
Operation : Identify [ v2.10 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Identify [ v2.10 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
>>> ERROR : BOOT ACK not received!
>>> Error : Fail to init protocol!
>>> Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Identify [ v2.10 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
>>> ERROR : FDL Start Failed!
>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
Reconnect Power/Cable!
Operation : Identify [ v2.10 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Identify [ v2.10 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:56
↧
Xioami Redmi 3s MI Account successfully Removed by Hydra Tool
Xioami Redmi 3s MI Account successfully Removed by Hydra Tool
Screen Short:
![]()
Logs:
Screen Short:
Logs:
Quote:
|
PreOperation Configuration Brand : AUTO Model : AUTO Storage : Auto Loader: Auto Port : Auto Connection : Searching for Qualcomm 9008 Device...Found FriendlyName :Qualcomm HS-USB QDLoader 9008 (COM4) SymbolicName :\??\USB#VID_05C6&PID_9008#6&2a0c3696&0&4#{a5dcbf1 0-6530-11d2-901f-00c04fb951ed} Driver Ver :03/25/2016,2.1.2.2 Getting device info...... Serial No.: 0x1C495A2E MSM ID : 0x0004F0E1, MSM8937-Qualcomm Snapdragon 430 PBL Ver : 00000000 PK HASH : 57158EAF1814D78FD2B3105ECE4DB18A 817A08AC664A5782A925F3FF8403D39A Firehose Loader[prog_emmc_firehose_8937_ddr_1.mbn] SaharaBoot... Ok Sending ...................Ok Connecting to Firehose... Ping... Ok Configuration...... Identifying Chip.... Ok Chip Configuration : MemoryName : eMMC MaxPayloadSizeToTargetInBytes : 1048576 MaxPayloadSizeToTargetInBytesSupported : 1048576 MaxPayloadSizeFromTargetInBytes : 4096 MaxXMLSizeInBytes : 4096 TargetName : 8937 Version : 1 *** STORAGE DEVICE INFO *** Memory Type : eMMC Block Size in Bytes : 512 Page Size : 512 Manufacturer ID : 21 Serial Number : 3848855251 Firmware Version : 7 Product Name : RX1BMB Physical Partitions : 3 Total Logical Blocks: Drive [0] 61071360[29.121 GB] Drive [1] 8192[4 MB] Drive [2] 8192[4 MB] Protocol : Universal Running : Ok Reading GPT[3] Drive [0] 52 Items Drive [1] 0 Items Drive [2] 0 Items Phone Information..... Brand : Xiaomi Vendor : Xiaomi Model : Redmi 3S ID : MMB29M SDK : 23 Release : 6.0.1 ABI : arm64-v8a CPU abilist : arm64-v8a,armeabi-v7a,armeabi Locale : en-GB Description : land-user 6.0.1 MMB29M V10.2.2.0.MALMIXM release-keys Miui Ver : V10 Device : land Mod_device : land_global Board : msm8937 Display ID : MMB29M Security Patch : 2017-04-01 Emmc_size : 16G Platform : msm8937 FRPPST : /dev/block/bootdevice/by-name/config Fingerprint : Xiaomi/land/land:6.0.1/MMB29M/V10.2.2.0.MALMIXM:user/release-keys Processing Remove MiAccount[Patch Method].... Backing up Partition for safety...Ok Scanning Patching address... > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED] > Patching address detected [PATCHED]Done!! Total Items patched : 51 Successfully patched address.. Failed to find persistbakpartition Action Result : Ok Elapsed Time : 00:00:17 |
Dipendra Pathak
↧
Oppo A71 (2018) CPH1801 Format user data successfully done by Hydra Tool
Oppo A71 (2018) CPH1801 Format user data successfully done by Hydra Tool
Screen Short:
![]()
Logs:
Screen Short:
Logs:
Quote:
|
PreOperation Configuration Brand : OPPO Model : A71 (2018) CPH1801 Storage : Auto Loader: a71_firehose.bin Port : Auto Connection : Searching for Qualcomm 9008 Device...Found FriendlyName :Qualcomm HS-USB QDLoader 9008 (COM7) SymbolicName :\??\USB#VID_05C6&PID_9008#6&36559b33&0&3#{a5dcbf1 0-6530-11d2-901f-00c04fb951ed} Driver Ver :08/31/2015,2.1.2.0 Getting device info...... Serial No.: 0x46D27B66 MSM ID : 0x0009A0E1, SDM450-Qualcomm Snapdragon 450 PBL Ver : 00000000 PK HASH : 05F06BA44EEB2ABDF14BB644AABC2E69 3DDF7B8711CC7CF07D4CD0EB2E1A8728 Firehose Loader[a71_firehose.bin] SaharaBoot... Ok Sending ..................Ok Connecting to Firehose... Ping... Ok Configuration. <?xml version="1.0" encoding="UTF-8" ?><data><log value="logbuf@0x0806CD20 fh@0x08069B88" /></data>. <?xml version="1.0" encoding="UTF-8" ?><data><response value="ACK" MinVersionSupported="1" MemoryName="eMMC" MaxPayloadSizeFromTargetInBytes="4096" MaxPayloadSizeToTargetInBytes="1048576" MaxPayloadSizeToTargetInBytesSupported="1048576" MaxXMLSizeInBytes="4096" Version="1" TargetName="8953" /></data>. Ok Chip Configuration : MemoryName : eMMC MaxPayloadSizeToTargetInBytes : 1048576 MaxPayloadSizeToTargetInBytesSupported : 1048576 MaxPayloadSizeFromTargetInBytes : 4096 MaxXMLSizeInBytes : 4096 TargetName : 8953 Version : 1 Protocol : Universal Running : Ok Processing A71 Format Userdata.... Action Result : Ok Rebooting Phone.... Ok Elapsed Time : 00:00:14 |
Dipendra Pathak
↧
firmware lifetime ?
the situation as always? at any moment epl can stop signing and when will it work again is not clear? thx
↧
↧
firmware lifetime ?
the situation as always? at any moment apple can stop signing and when will it work again is not clear? thx
↧
i cannot login my username and password
i cannot login my username and password
how can i download infinity box sm module
https://imgur.com/DHLBGQUhttps://imgur.com/DHLBGQU
https://imgur.com/DHLBGQU
https://imgur.com/DHLBGQU
how can i download infinity box sm module
https://imgur.com/DHLBGQUhttps://imgur.com/DHLBGQU
https://imgur.com/DHLBGQU
https://imgur.com/DHLBGQU
↧
Vivo Y11 (1906) FRP successfully removed by Hydra Tool
Vivo Y11 (1906) FRP successfully removed by Hydra Tool
Screen Short:
![]()
Logs:
Screen Short:
Logs:
Quote:
|
PreOperation Configuration Brand : VIVO Model : Y11 (1906) Storage : Auto Loader: Vivo_Y11.elf Port : Auto Connection : Searching for Qualcomm 9008 Device...Found FriendlyName :Qualcomm HS-USB QDLoader 9008 (COM16) SymbolicName :\??\USB#VID_05C6&PID_9008#5&72afd71&0&7#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Driver Ver :08/31/2015,2.1.2.0 Getting device info..Ok Device MODE : Firehose Connecting to Firehose... Ping.. Ok Configuration...... Identifying Chip.... Ok Chip Configuration : MemoryName : eMMC MaxPayloadSizeToTargetInBytes : 1048576 MaxPayloadSizeToTargetInBytesSupported : 1048576 MaxPayloadSizeFromTargetInBytes : 4096 MaxXMLSizeInBytes : 4096 TargetName : 8937 Version : 1 *** STORAGE DEVICE INFO *** Memory Type : eMMC Block Size in Bytes : 512 Page Size : 512 Manufacturer ID : 144 Serial Number : 680128575 Firmware Version : 892350512 Product Name : hB8aP> Physical Partitions : 3 Total Logical Blocks: Drive [0] 61071360[29.121 GB] Drive [1] 8192[4 MB] Drive [2] 8192[4 MB] Protocol : Universal Running : Ok Reading GPT[3] Drive [0] 60 Items Drive [1] 0 Items Drive [2] 0 Items Phone Information...... Brand : vivo Vendor : vivo Model : vivo 1906 ID : PKQ1.190616.001 SDK : 28 Release : 9 ABI : arm64-v8a CPU abilist : arm64-v8a,armeabi-v7a,armeabi Locale : en-US Description : msm8937_64-user 9 PKQ1.190616.001 compiler12021300 release-keys Device : PD1930F_EX Display ID : PKQ1.190616.001 release-keys Security Patch : 2020-11-01 Emmc_size : 16GB Platform : =SDM439 Fingerprint : vivo/1906/1906:9/PKQ1.190616.001/compiler12021300:user/release-keys Processing Forced Erase.... - Removing FRP [Auto] Ok - Forced Erase Userdata Action Result : Ok Elapsed Time : 00:00:09 |
Dipendra Pathak
↧