Warning , you are using custom pinout config make shure that NRST and GND on proper places!
EasyJtag Suite ver.: 1.0.55.1 started.
Operating system ver.: Windows NT 6.2 (build 9200).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9003 Config ver.:1.00
I/O Level set to : 2800 mV
Box S/N: 1616100C7FD4B36E ,FW Ver.: 01.47
Connecting to Target...
Target not found , check power and connection! , Error code:-1
Start Z3X Jtag Pin Finder...
Successefuly connected to box on COM10
Waiting for box reset...
Box S/N: 000000007FD4B36E
Box Working Mode: JTAG Pin Finder.
Start Z3X Jtag Pin Finder...
Stage 1: Search TCK / TMS / TDI / TDO...
Get IDCODE...
JTAG Pinout Found: TCK: Pin 9 / TMS: Pin 7 / TDI: Pin 5 / TDO: Pin 13
CPU IDCODE : 0x2B89102F Mfg.: 0x017, Part: 0xb891, Ver.: 0x2
Stage 2: Search TRST...
TRST Pin Found: TRST: Pin 4
Box S/N: 1616100C7FD4B36E, ,FW Ver.: 01.47
Box Working Mode: JTAG Box.
Start Z3X Jtag Pin Finder...
Successefuly connected to box on COM10
Waiting for box reset...
Box S/N: 000000007FD4B36E
Box Working Mode: JTAG Pin Finder.
Start Z3X Jtag Pin Finder...
Stage 1: Search TCK / TMS / TDI / TDO...
Get IDCODE...
JTAG Pinout Found: TCK: Pin 9 / TMS: Pin 7 / TDI: Pin 5 / TDO: Pin 13
CPU IDCODE : 0x2B89102F Mfg.: 0x017, Part: 0xb891, Ver.: 0x2
Stage 2: Search TRST...
TRST Pin Found: TRST: Pin 4
Box S/N: 1616100C7FD4B36E, ,FW Ver.: 01.47
Box Working Mode: JTAG Box.
Now connect to repair mode fail
Warning , you are using custom pinout config make shure that NRST and GND on proper places!
EasyJtag Suite ver.: 1.0.55.1 started.
Operating system ver.: Windows NT 6.2 (build 9200).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9003 Config ver.:1.00
I/O Level set to : 2800 mV
Box S/N: 1616100C7FD4B36E ,FW Ver.: 01.47
Connecting to Target...
Target not found , check power and connection! , Error code:-1
Using EasyRepair Mode...
Warning , you are using custom pinout config make shure that NRST and GND on proper places!
Checking repair data...
EasyJtag Suite ver.: 1.0.55.1 started.
Operating system ver.: Windows NT 6.2 (build 9200).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9003 Config ver.:1.00
I/O Level set to : 2800 mV
Box S/N: 1616100C7FD4B36E ,FW Ver.: 01.47
Connecting to Target...
Target not found , check power and connection! , Error code:-1
EasyJtag Suite ver.: 1.0.55.1 started.
Operating system ver.: Windows NT 6.2 (build 9200).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9003 Config ver.:1.00
I/O Level set to : 2800 mV
Box S/N: 1616100C7FD4B36E ,FW Ver.: 01.47
Connecting to Target...
Target not found , check power and connection! , Error code:-1
Start Z3X Jtag Pin Finder...
Successefuly connected to box on COM10
Waiting for box reset...
Box S/N: 000000007FD4B36E
Box Working Mode: JTAG Pin Finder.
Start Z3X Jtag Pin Finder...
Stage 1: Search TCK / TMS / TDI / TDO...
Get IDCODE...
JTAG Pinout Found: TCK: Pin 9 / TMS: Pin 7 / TDI: Pin 5 / TDO: Pin 13
CPU IDCODE : 0x2B89102F Mfg.: 0x017, Part: 0xb891, Ver.: 0x2
Stage 2: Search TRST...
TRST Pin Found: TRST: Pin 4
Box S/N: 1616100C7FD4B36E, ,FW Ver.: 01.47
Box Working Mode: JTAG Box.
Start Z3X Jtag Pin Finder...
Successefuly connected to box on COM10
Waiting for box reset...
Box S/N: 000000007FD4B36E
Box Working Mode: JTAG Pin Finder.
Start Z3X Jtag Pin Finder...
Stage 1: Search TCK / TMS / TDI / TDO...
Get IDCODE...
JTAG Pinout Found: TCK: Pin 9 / TMS: Pin 7 / TDI: Pin 5 / TDO: Pin 13
CPU IDCODE : 0x2B89102F Mfg.: 0x017, Part: 0xb891, Ver.: 0x2
Stage 2: Search TRST...
TRST Pin Found: TRST: Pin 4
Box S/N: 1616100C7FD4B36E, ,FW Ver.: 01.47
Box Working Mode: JTAG Box.
Now connect to repair mode fail
Warning , you are using custom pinout config make shure that NRST and GND on proper places!
EasyJtag Suite ver.: 1.0.55.1 started.
Operating system ver.: Windows NT 6.2 (build 9200).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9003 Config ver.:1.00
I/O Level set to : 2800 mV
Box S/N: 1616100C7FD4B36E ,FW Ver.: 01.47
Connecting to Target...
Target not found , check power and connection! , Error code:-1
Using EasyRepair Mode...
Warning , you are using custom pinout config make shure that NRST and GND on proper places!
Checking repair data...
EasyJtag Suite ver.: 1.0.55.1 started.
Operating system ver.: Windows NT 6.2 (build 9200).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9003 Config ver.:1.00
I/O Level set to : 2800 mV
Box S/N: 1616100C7FD4B36E ,FW Ver.: 01.47
Connecting to Target...
Target not found , check power and connection! , Error code:-1