The Pegausus instructions prompt to:
*have the phone ON
*use the C260 cable (which is physically compatible; fits in the battery bay)
It says to:
1. Power on the phone (seems it won't power on using only the C260 cable)
2. Wait 'till the phone boots up and shows "insert SIM (this never happens;
mine goes to the main/standy screen. This is with no SIM card installed)"
Pegasus module for C275L can read the phone config, but the unlock link doesn't work (link is live/clickable, but no output results on the screen;
except for "unlock complete 00:00:00" or something like that.
When I try having Pagasus read the phone again, it still shows as locked to Entel PCS (I know "PCS", but the phone indeed has a SIM slot and either dual or quadband spec)
I tried the E210 with the FSB and the USB connected to the Pegasus box
(thre's only one physical interface on the phone: the common, flat Samsung port on many Samsung 2G/3G models).
Any advice is greatly appreciated; thank you in advance!
*have the phone ON
*use the C260 cable (which is physically compatible; fits in the battery bay)
It says to:
1. Power on the phone (seems it won't power on using only the C260 cable)
2. Wait 'till the phone boots up and shows "insert SIM (this never happens;
mine goes to the main/standy screen. This is with no SIM card installed)"
Pegasus module for C275L can read the phone config, but the unlock link doesn't work (link is live/clickable, but no output results on the screen;
except for "unlock complete 00:00:00" or something like that.
When I try having Pagasus read the phone again, it still shows as locked to Entel PCS (I know "PCS", but the phone indeed has a SIM slot and either dual or quadband spec)
I tried the E210 with the FSB and the USB connected to the Pegasus box
(thre's only one physical interface on the phone: the common, flat Samsung port on many Samsung 2G/3G models).
Any advice is greatly appreciated; thank you in advance!