Mates,
need some help here..
Unit: Nokia C7
Problem: The owner wants to upgrade the version..
initial version of the unit before flashing was
111.40.1511..
i have 14.2 version...
i flashed the fone with 14.2 but after flashing..
phone just vibrates after switching..
i downloaded v25.8 and tried it also..
but got same result.. phone vibrates after switch on...
logs:
need help here cyclone team... what went wrong? am using the latest
flash file and still no luck..:((
need some help here..
Unit: Nokia C7
Problem: The owner wants to upgrade the version..
initial version of the unit before flashing was
111.40.1511..
i have 14.2 version...
i flashed the fone with 14.2 but after flashing..
phone just vibrates after switching..
i downloaded v25.8 and tried it also..
but got same result.. phone vibrates after switch on...
logs:
Code:
Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.1.870
Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C0001716
2009, wk19
Initializing security card...
Card Serial Number: D00007E9
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4.99v PASSED
MCU Voltage 3.30v PASSED
Core Voltage 1.77v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 4.96v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.92v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 93
Avaiable Physical Memory: 1.339GB
Avaiable Virtual Memory: 1.886GB
Avaiable Pagefile: 1.943GB
Initializing FBUS...
All initialized - Ready to work
Retrieving Variants for Product RM-675 - wait...
2 Variants Retrieved
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing RM-675_014.002_79.92_prd.core.fpsx (CMT)...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001030
CMT_PUBLIC_ID: 17E00217F8A40344D6BAEF0D680C7733842DE3D0
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
RM-675_014.002_79.92_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.14.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC006800000131, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0068 (Samsung), Size: 1024MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.14.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 95A68E9FA27B2BFA89EA204FC846EB73DEF1D93F
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00040000-0x0007FFFF, ONENAND
EraseArea[0,CMT]: 0x000C0000-0x008BFFFF, ONENAND
EraseArea[0,CMT]: 0x00DC0000-0x0E97FFFF, ONENAND
EraseArea[0,CMT]: 0x2E100000-0x3E5FFFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 2.109s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT SOS+PMML Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT GENIO_INIT Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT LDSP Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
Programming Status OK!
All blocks written OK! Time taken 19.625s
Flashing Speed: 55190.90 kBit/S
Processing RM-675_014.002_79.92_prd.core.fpsx (APE)...
Processing RM-675_014.002_18.01_APAC2_79.92_prd.rofs2.fpsx (CMT)...
BB5
PAPUBKEYS Hash for CMT: 95A68E9FA27B2BFA89EA204FC846EB73DEF1D93F
Started group flash erase
EraseArea[0,CMT]: 0x09F40000-0x0DA7FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.266s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS2 Certificate...
Programming Status OK!
All blocks written OK! Time taken 2.797s
Flashing Speed: 63199.82 kBit/S
Processing RM-675_014.002_18.01_APAC2_79.92_prd.rofs2.fpsx (APE)...
Processing RM-675_014.002_C02.01_SEAP_79.92_prd.rofs3.fpsx (CMT)...
BB5
PAPUBKEYS Hash for CMT: 95A68E9FA27B2BFA89EA204FC846EB73DEF1D93F
Started group flash erase
EraseArea[0,CMT]: 0x0DA80000-0x0E97FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.78s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS3 Certificate...
Programming Status OK!
All blocks written OK! Time taken 0.281s
Flashing Speed: 329.34 kBit/S
Processing RM-675_014.002_C02.01_SEAP_79.92_prd.rofs3.fpsx (APE)...
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Phone not detected at USB -> Timeout, no any compatineed help here cyclone team... what went wrong? am using the latest
flash file and still no luck..:((